Lifting cranes are commonly used equipment in all industries. Due to many outstanding advantages, lifting cranes are used in many key industries.

Crane lifting service in the factory
Due to the demand for steel structure production and mechanical processing, the demand for lifting and lowering in the workshop is relatively large. But in terms of working frequency, lifting cranes used in workshops have the following parameters:

- Load of 2 to 10 tons.

- Aperture from 5 m to 20 m depending on the space of the workshop.

- Lifting speed and movement speed of palang should choose 1 speed to save the maximum cost of the product.

- Speed ​​of moving type 2 crane is fast / slow.

- Control crane from hand press synchronous wire control or remote control.

Lifting cranes serving factories at Hung Vuong Concrete Factory - Binh Phuoc

Crane service component assembly workshop
Car and electronics assembly workshops often have great demand for lifting and moving. However, the lifting capacity is usually from 100kg to 1 ton. The working frequency of this type of lifting crane is usually average. For these workshops, suitable types of cranes include:

- Lifting capacity from 100kg to 1 ton.

- Crane aperture from 5 m to 20 m.

- Lifting, moving speed should choose standard speed type.

- This type of crane often uses manual remote control system.

Cranes serve the steel industry, metallurgy
Factories, factories producing steel and metallurgy are places with great demand for lifting and explosion. Therefore, when selecting lifting cranes for these plants often require absolute attention and be able to work under extreme conditions.

- The working regime of lifting cranes must be at least FEM 2M or higher.

- Meet the working conditions at high temperatures.

- Lifting crane equipment should not be equipped with inverter structure.

- In order to optimize production efficiency, it is necessary to select cranes with multi-level lifting and moving speeds.

Crane service concrete factory
When selecting a lifting crane for a concrete structure factory, the following points should be noted:

- Working mode of the crane should be put on top priority.

- Selected cranes must have several levels of work.

Especially, when used in factories producing concrete structures, lifting cranes must be resistant to dust and water.

Cranes serve in hydroelectric, thermoelectric plants
Typically, the types of cranes used in hydropower and thermal power plants often work very little but are extremely important. To avoid causing great economic losses, when selecting lifting cranes, the following factors must be ensured:

- Make sure to choose the right equipment under the hook hook for all types of cranes.

- Equipping more inverters for lifting cranes.

- Pay attention to the working scope of each type of crane.

Lifting cranes are one of the important equipment for the industry, especially for key industries. This is one of the traditional products of Quang Trung Industrial Group. With extensive experience, Quang Trung is ready to provide customers with lifting products with high quality, international standards and competitive prices.

At Quang Trung Industrial Group Joint Stock Company, we specialize in manufacturing, manufacturing and installing various lifting equipment for the field of construction mechanics and many other devices. For further information, please contact us.

QUANG TRUNG INDUSTRIAL GROUP JOINT STOCK COMPANY
Address:
Lot 33, BT4 Linh Dam Peninsula, Hoang Mai, Hanoi
Phone: 037 964 5086
Email: tapdoanquangtrunggroup@gmail.com